An Eco Base Fast Fit Foundation grid system for use as a base for  garden buildings that is quick to assemble, easy to use and environmentally friendly.

These lightweight, but highly durable grids click together to form a firm, strong and long lasting base.

Not only does EcoBase Fastfit provide you with a firm, strong, long-lasting and well-drained foundation for garden buildings, it is now even quicker to install through the use of self-fastening push connectors to link grids together.

A quick-to-assemble, easy-to-use and environmentally-friendly base for garden buildings.  Use EcoBase Fastfit as an alternative to a concrete slab, paving flags or a wooden base.

As the UK’s original plastic grid foundation system for garden buildings, EcoBase has evolved with the introduction of EcoBase Fastfit.  Not only does EcoBase Fastfit provide you with a firm, strong, long-lasting and well-drained foundation for garden buildings, it is now even quicker to install through the use of self-fastening push connectors to link grids together.

EcoBase Fastfit can be used as a firm foundation for a wide variety of garden buildings and structures.  Here’s a few of them…

Garden sheds
Summerhouses
Garden playhouses
Potting sheds
Bike stores
Log stores
Pavilions
Garden furniture stores
Wheelie bin stands

EcoBase Fastfit comes with a permeable membrane, cut to the size of the building’s foundation to suppress the growth of weeds as well as easy-to-follow assembly instructions.  To watch our short installation video, please click here.

Grid Footprint: 500mm x 500mm
Grid height: 40mm
Grid Colour: Black
Grid Material: 100% UK Sourced Recycled Plastics (Non-toxic)
Grid Load Capacity: with Correct Loading up to 300 tonnes per m/sq
Grid Weight: 1.2KG
Grid Cell Size: 70mm Square (approx and Nominal)
Grid Connectors: Integral T – shaped connector and slot
Please note: Individuals are responsible for an assessment of their ground conditions on site.

SUPPLIED FOR SELF ASSEMBLY USE – A TIMBER FLOOR IS RECOMMENDED TO BE PLACED ON TOP OF THE BASE (NOT SUPPLIED)

INSTALLATION OF THE ECO BASE STANDALONE IS NOT AVAILABLE. 

If you require an ECO BASE to be installed with your shed please check the options with your shed. 

For delivery to postcodes DD, KW, IV, AB, PH, PA and all offshore addresses, please call for a quote.

The post Eco Base Fast Fit Foundations (Various Sizes) Prices From first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 20’x8′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 20’x6′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 20’x4′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 18’x8′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 18’x6′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 18’x4′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 16’x8′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 16’x6′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.

High quality adaptable Pent potting sheds manufactured to the highest standard using sustainable timber. Available with a choice of single or double door as standard, the ideal shed for keen gardeners.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key.

WINDOW SIZE (if applicable)
457x610mm
Toughened safety glass with PVC sills

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

4 Foot 2 Tier Staging

This Power 4ft wide 2-tier staging unit is designed to add extra space to store garden tools and more.

It’s the perfect companion for a Power shed. Built from responsibly sourced high-grade Scandinavian timber with 12mm thick shiplap tongue and groove this is a shed accessory to give your years of use and functionality. Great for keeping your accessories neatly stored but still close to hand whilst also expanding the storage capabilities of your shed.

The special formula wood preserver allows you to go a year without needing to retreat.

*Image shows 2 x the 4ft version of this unit.

• 2ft Dimensions: H 106 x W 60 x D 50cm

• 4ft Dimensions: H 106 x W 119 x D 50cm

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

The post Power 16’x4′ Tongue and Groove Timber Pent Potting Shed (single or double door) first appeared on ShedMaster UK | Garden Sheds | Garden Buildings Installations.