Description

The Readymade – Driveway Gate Diagonal 3500mmx1800mm Black or Grey is a full privacy driveway gate with a diagonal solid infill and flat top, providing full privacy with a modern and streamlined design.
Full privacy is a great option to ensure the maximum protection of your property.

Available in 2 colours Black (RAL 9005) and Grey (RAL 7016).

Although aluminium is very strong, it is also lightweight which makes it a versatile material. This is perfect for the fabrication of gates compared to traditional metals such as; wrought iron, cast iron, wood or stainless steel.

Another advantage of the Readymade – Driveway Gate Diagonal 3500mmx1800mm  is that it is very low maintenance. Aluminium is highly resistant to corrosion unlike other metals, it will not suffer from changing weather conditions and actually becomes stronger in low temperatures, perfect for UK buyers!

The metal double gates comes supplied with 4 x Wall mounted hinges and 2 x Floor mounted hinges as standard.

In order to keep the gates looking brand new, simply wash down with soapy water and rinse. There is no special treatment required and the gates also have a 5 year manufacturer’s guarantee.

Specifications

Gate Width: Width A 350cm x Height B 180cm x Depth 3.5cm

This item is supplied with NO poles/posts as standard (posts are available as optional extras)

IMPORTANT : The Double Swing Aluminium Driveway Gate Sizes shown are the actual gate sizes. The overall gap required in which to install the gate, needs an additional +20mm-60mm allowance on the standard width of the gate, to accommodate 5mm-25mm space for the hinges on each side of the gate, plus the recommended 10mm clearance between gate leafs. The overall height required, needs to be a minimum of +100mm higher than the standard height of the gate, This will allow a 50mm space for the top hinges and an additional 50mm space for the bottom hinges Please see attached installation guide for more details.

Important: Please note, these are special order and therefore cannot be cancelled or returned after order placed. These are made by order.

Colours Available : Black or Grey (contact us should you require a different colour for a quote and availability)

Optional Gate Posts

The gate is not supplied with posts. Optional Gateway posts are available and come in the following sizes:

Please ensure if you purchase your posts to select the correct size required!

Option A – 100x100x3.5mm-2400mm Aluminium flanged post and Cap
Option B – 100x100x3.5mm-3000mm Aluminium flanged post and Cap
Option C – 150x150x3.5mm-2400mm Aluminium flanged post and Cap
Option D – 150x150x3.5mm-3000mm Aluminium flanged post and Cap

Optional Extras

Bolt-On Off-Centred Ground Stop

Strong surface mounted ground stop for double wing gates. Black anodised aluminium top plate.
Suitable for surface mounted drop bolts.
Maximum drop bolt axle diameter: 20mm.
Adjustable in depth, different gate profiles possible: VSA – VSF – Keydrop: 40 – 60mm; Electradrop: 40 – 50mm.
Anchor pins included.

Aluminium Gate Hold-Back Catch

Aluminium powder coated chassis.
Anchoring holes for fast, strong fixing concrete.
Height adjustability of the catch hook: 40mm.
Stop rubber and polyamide catch hook avoid damaging the gate.
Stop rubber adjustments for profiles 40mm to 60mm.
Reversibility of the catch hook: pre-mounted with hook up to catch the underside of the gate.

Lockable Drop Bolt

Throw: 140 mm.

Lockable drop bolt with cylinder.

Same drilling pattern as VSF and VSA.

Possibility to work with same key as gatelock.

Height adjustability of the drop bolt: 100mm.

Height adjustability on 3 positions: 50 mm / position.

The gate can be locked in open or closed position.

For gate profiles 30×30 mm or more.

Surface Mounted Dropbolt with Aluminium Bolt

Aluminium pin.

Aluminium head block and housing.

For profiles as of 40mm or more.

Height adjustability of the drop bolt: 100mm.

Throw: 140mm

Locks itself between the wings of the gate.

Fast and easy fixing with Quick-Fix.

Easy to retrofit.